June 16th, 2010 | In sales and distribution | No comments
Author: Waltraud Lederer
Power-Heat-Set knows the answer of this question: The most important asset is a high qualified, friendly and customer-orientated staff. A German expression translates as: “A satisfied customer is a good customer”. Therefore, Power-Heat-Set not only recognizes the specialized knowledge of their employees but also of their customer service skills. We are happy that our staff understands our company philosophy: “For our customer, only the best!” They give every effort with the attitude of satisfying our customer’s needs.
We are very proud that our customers perceive and appreciate our attention to their needs. One of our valued customers, Al Abdullatif of Saudi Arabia – Mr. Sohail , sent a big compliment via email to our Exportmanager Beate Jaschik regarding her excellent customer service skills. Beate was very happy to be recognized and said. “Personal appreciation from my customer is the biggest compliment I could receive.”
We share Beate’s happiness and we are proud of our entire staff.
June 15th, 2010 | In sales and distribution | No comments
Author: Waltraud Lederer
.JPG)
The Bavarian company Power-Heat-Set based in Toeging exports its heat setting machines all over the world. Carpet manufacturers from all corners of the world heat their yarn before manufacturing their carpets using the machines which are “Made in Bavaria”. If you have a carpet at home it is very likely that the yarn was heatset by these innovative machines.
However it is not only the Power-Heat-Set machines which travel worldwide but also Power-Heat-Set´s customers. For them there is a top modern technical support team available in Toeging including a machine for trial runs.
Power-Heat-Set offers its customers the possibity to convince themselves of the quality of the machines by operating trial runs. The customer service is made complete with our popular customer training offered by our qualified technical staff. It is nearly a daily occurrence that we have international visitors at our company and in the last 12 months we have had customers visiting us from 15 nations.
- Egypt
- Belgium
- Brazil
- China
- France
- India
- Iran
- Italy
- Russia
- Saudi Arabia
- Slovenia
- Turkey
- Uzbekistan
- USA
- United Arab Emirates
In June Power-Heat-Set is exhibiting at the ITMA Asia in Shanghai. From experience numerous test runs are arranged at trade fairs and the company is already looking forward to the new challenges.
|
Why I like working for Power-Heat-Set. Waltraud Lederer, Controlling:
We not only have customers worldwide but we also have a daughter company in the USA. I really enjoy my international position which enables me from time to time to work directly on the spot with my colleagues in the USA. |
March 11th, 2009 | In sales and distribution | No comments
Author: Lisa Thaha
During this strained economic situation, many machines are not running at their full capacities.
Therefore, take the opportunity to improve, service and maintain your GVA machines, in order to save costs in the long run.
Power-Heat-Set technicians are at your disposal to support you with service and for maintenance. Take the chance to overhaul and upgrade your heat setting equipment (GVA belt & mast versions), so that you are fit for the economic revival! We want to support our customers all over the world, with our campaign “Fit for economic revival” to reinforce our partnership and offer therefore a
Special Service Package:
Scope of services included in the package:
- Inspection of the machine
- Check for missing or defective parts
- Check wear parts
- Reviewing and demonstrating the guidelines for maintenance
- Adjusting the machine to an optimum settings (efficiency increase)
- Hand-over of a detailed service report
This service package will be available for a special daily rate. Please contact us for an individual offer!
With regards to our special flat rate for a service assignment we offer additionally a
Special discount for spare parts and retrofit orders, which will be placed in connection with our campaign “Fit for economic revival”
Volume spare parts order
|
Technician free of charge:
|
0 - 2.499 €
|
1 day
|
2.500 – 4.999 €
|
2 days
|
5.000 - 7.499 €
|
3 days
|
7.500 – 9.999 €
|
4 days
|
10.000 – 19.999€
|
5 days
|
more than 20.000 €
|
5% discount + technician free of charge
|
Please consider that upgrading your GVA belt version with our new GVA developments does not only enhance the technique of your existing GVA, but will have other positive effects as well, e.g. higher quality, more throughput, energy savings, save up to 173.600 €/year – see sample calculation below.
|
Steam
consumption
|
electricity
|
productivity
|
total cost/year
(7000h)
|
Savings/year of GVA5009 eco
|
Existing GVA 2500 Mast
|
250 kg/h
|
55 kW/h
|
5 tons
|
133.700 €
|
173.600 €*
|
Existing GVA 5000 Mast
|
300 kg/h
|
105 kW/h
|
10 tons
|
193.200 €
|
99.400 €
|
Existing GVA 5000 Belt
(last model)
|
200 kg/h
|
90 kW/h
|
10 tons
|
145.600 €
|
51.800 €
|
New GVA 5009 eco
|
100 kg/h
|
70 kW/h
|
10 tons
|
93.800 €
|
‐
|
*Compared with two GVA2500 Mast to be based on 10 tons production!
Calculated with conservative numbers and steam cost of 50€/t, electricity of 0,12 €/kWh)
New developments are:
- For an improved runnability of the yarn to the coiler or the twinrollbox to ensure optimized winding after the heat set process our GVA 5009 eco has a One-Roll Capstan overfeed system
- To increase the cooling-down effect on the transport belts before re-entering the GKK and to minimize the heating-up of the belt rails the new GVA 5009 eco has a belt rail entrance with temperature insulation. The new belt rail entrance will avoid humidity loss of the yarn before the heat setting process as well as shrinking of the deposited yarn on the belt before entering the climate chamber.
- A complete new system for the entry and exit of the climate chamber prevents that steam escapes from the climate chamber, thus reducing the steam consumption considerably and at the same time achieving an even more efficient steam supply.
- New as well is the double insulation of the climate chamber to lower the energy loss. Thus the costs of electricity will be reduced and the double insulation will even have some influence on reducing the steam consumption.
- The new GVA 5009 eco will be available as well with a central cooling station to avoid dust being stirred up during the operation and with a better heat transport to the outside. As each position has its own fan, an individual control of each position will be possible.
Do not hesitate to contact us to consult us regarding the retrofitting of your equipment or for a quotation for the NEW GVA 5009 eco. We are at your disposal any time and are looking forward to help you to master the current economic crisis with our consumption saving equipment. Call +49-8631-393480 or fax +49-8631-393580 or send an email to: mail@power-heat-set.com.
February 17th, 2009 | In sales and distribution | No comments
Author: Peter Resch
Difficult times require innovative solutions! We help you to produce more economic, with less costs, with higher efficiency, better quality and a ROI of less than 2 years, for conversions even less than 1 year! With our overheated steam heat set machine, the new “GVA5009 eco” you will save and win:
-
Steam up to 50% less and even more
-
Electricity up to 25% less and even more
-
Higher Quality, especially with PA
-
Less Maintenance and Spare Parts consumption
Convert your existing machine: With these new developments Power-Heat-Set is able to help you to overcome the current economic crisis, because these developments will not only be integrated in the NEW GVA 5009 eco, but they also can be retrofitted to existing GVA belt versions. In this case the ROI is less than 1 year! Sample Calculation and ROI: (Calculated with conservative numbers and steam cost of 50€/t, electricity of 0,12 €/kWh)
| |
steam consumption |
electricity |
productivity |
total cost/year (7000h) |
Savings/year of GVA5009 eco |
| Existing GVA 2500 Mast |
250 kg/h |
55 kW/h |
5 tons |
133.700 € |
173.600 €* |
| Existing GVA 5000 Mast |
300 kg/h |
105 kW/h |
10 tons |
193.200 € |
99.400 € |
| Existing GVA 5000 Belt (last model) |
200 kg/h |
90 kW/h |
10 tons |
145.600 € |
51.800 € |
| New GVA 5009 eco |
100 kg/h |
70 kW/h |
10 tons |
93.800 € |
- |
*Compared with two GVA2500 Mast to be based on 10 tons production! Send us your specific numbers and we calculate your individual ROI!
| Special offer - limited until February 2009: Right now we have already many orders for conversions, therefore we can grant special discount due to the amount produced > use your chance for it! Do not hesitate to contact us to consult you regarding the retrofitting of your equipment or for a quotation for the NEW GVA 5009 eco. We are at your disposal any time and are looking forward to help you to master the current economic crisis with our consumption saving equipment. We are here to assist you! |
February 16th, 2009 | In sales and distribution | No comments
Author: Lisa Thaha
Power-Heat-Set‘s research and development department is continuously working on improving the reduction of energy consumption as well as the heat setting quality of our heat setting equipment.The persevering endeavors have been rewarded and Power-Heat-Set proudly presents the new generation of heat setting with overheated steam, the “GVA 5009 eco”. Many new developments were integrated in the new “GVA 5009 eco”, thus achieving further reductions of the energy consumption of approx. 40 % less than the existing GVA belt versions and better quality of the heat set yarn. With these new developments Power-Heat-Set is able to help you to overcome the current economic crisis, because these developments will not only be integrated in the NEW GVA 5009 eco, but they also can be retrofitted to existing GVA belt versions. New developments are:
- For an improved runnability of the yarn to the coiler or the twinrollbox to ensure optimized winding after the heat set process our GVA 5009 eco has a One-Roll Capstan overfeed system
- To increase the cooling-down effect on the transport belts before re-entering the GKK and to minimize the heating-up of the belt rails the new GVA 5009 eco has a belt rail entrance with temperature insulation. The new belt rail entrance will avoid humidity loss of the yarn before the heat setting process as well as shrinking of the deposited yarn on the belt before entering the climate chamber.
- A complete new system for the entry and exit of the climate chamber prevents that steam escapes from the climate chamber, thus reducing the steam consumption considerably and at the same time achieving an even more efficient steam supply.
- New as well is the double insulation of the climate chamber to lower the energy loss. Thus the costs of electricity will be reduced and the double insulation will even have some influence on reducing the steam consumption.
- The new GVA 5009 eco will be available as well with a central cooling station to avoid dust being stirred up during the operation and with a better heat transport to the outside. As each position has its own fan, an individual control of each position will be possible.
Do not hesitate to contact us to consult us regarding the retrofitting of your equipment or for a quotation for the NEW GVA 5009 eco. We are at your disposal any time and are looking forward to help you to master the current economic crisis with our consumption saving equipment. Call +49-8631-393480 or fax +49-8631-393580 or send an email to: mail@power-heat-set.com We are here to assist you!